Contents: How To, Main Page
Step 11 Lets get this thing done already. The finishing touches will be broken down into two areas of detail. First lets get some color on this thing except black.
Image 25 (Greeblies) If you don't know what a "greeblie" is you probably aren't this far along in building your helmet; you probably aren't even interested in building one and are not on this page except by accident. At this time just hit your "back" button and go on about your business. Greeblies are the un-named portions of costumes that need a title, for your sake we'll give them colors and shapes to identify each one.
Image 26 and 26.5 (Greeblies) cont. Lets begin with the easiest ones. I used to use 1/2" PVC round stock to make these, but since, I've simplified the process by utilizing Snap Caps. These are very simple to mount and come pre-colored so this alleviates the pain of painting one more item. To mount the caps you must first tap the com box in two locations. The drill bit you use depends on what size screw you choose for attaching the Snap Cap base.
Image 27 (Greeblies) cont. Mount the Snap Cap bases with screws. How easy is that?
This is why they are named Snap Caps. Snap the covers on and your all done.
Image 28 (Greeblies) cont. You may choose whatever material you wish for the blue rectangle greeblie. I have a supplier that cuts and ships me the blue acrylic tiles I use now. To mount this greeblie, I first remove some of the paint in a small area in the center of where I plan to glue the acrylic. Plastic Weld can make a mess out of paint and if you don't use it sparingly, you will end up with plastic weld oozing out from under your piece.
Repeat the process for the top two square greeblies. I use white ABS to make those. They are smaller and easier to create.
ANTENNA
Image 29 and 29.5(Antenna) If you have a steady hand, the best way to achieve a finished look on the antenna is to paint is using Autoclad Silver or Testors modeling paint.
ALMOST THERE, stay on target!