Tiny boots size 6

These boots were made for walkin and the gloves were made to push the trigger on the big guns.

Moderators: Drewid, RaiderNick, hbrika

Post Reply
Astraline
Rookie
Rookie
Posts: 9
Joined: Thu Feb 09, 2017 10:10 pm
First Name: Joan
Tkid: 31461
Garrison: Connecticut

Tiny boots size 6

Post by Astraline » Tue Feb 21, 2017 2:47 am

I know I'd have to take off the bottom buckle and take care of the embossing but is that V too much at the top?
Attachments
41V68t8sYPL.jpg
Joan Holycross-Otto
ID 31461
Connecticut Garrison

User avatar
Sarge
Major
Major
Posts: 452
Joined: Fri Aug 15, 2008 1:16 am
Tkid: 21158
Garrison: Ohio Garrison
Location: Ohio

Re: Tiny boots size 6

Post by Sarge » Tue Feb 21, 2017 4:15 am

It depends on your GML, I'd shoot them a photo of the boots and see what they say. Should be OK for basic approval with a little work.
_____________
IG/IS/TI/IC-21158
IOC Liaison Officer
Member: Firelands Command Division
1st Air Cavalry Commandant

User avatar
Drewid
Detachment Leader
Posts: 8825
Joined: Fri Nov 14, 2008 11:07 pm
First Name: Drew
Tkid: 4237
Garrison: Southern California
Location: Ventura, CA
Contact:

Re: Tiny boots size 6

Post by Drewid » Tue Feb 21, 2017 7:09 am

As far as engineer boots go, the Cody James boots from Boot Barn are the best ones to go with. They have no embossing on the leather and they will hold up better over time.
"Web Jawa" Drew
Imperial Gunnery Corps Detachment Leader
IG/IC/CB/TK 4237

Astraline
Rookie
Rookie
Posts: 9
Joined: Thu Feb 09, 2017 10:10 pm
First Name: Joan
Tkid: 31461
Garrison: Connecticut

Re: Tiny boots size 6

Post by Astraline » Tue Feb 21, 2017 12:19 pm

Thanks!!! I will show them to my gml. Unfortunately the cody james boots don't come in my size but I will pass that on to others in my garrison that may need those kind of boots. :D
Joan Holycross-Otto
ID 31461
Connecticut Garrison

User avatar
Ripley
Lieutenant
Lieutenant
Posts: 157
Joined: Tue Jul 02, 2013 3:55 pm
First Name: Nikki
Tkid: 14924
Garrison: Florida
Location: Wellington, FL

Re: Tiny boots size 6

Post by Ripley » Tue Feb 21, 2017 10:03 pm

Astraline wrote:I know I'd have to take off the bottom buckle and take care of the embossing but is that V too much at the top?
I'm a 6.5 and had a hard time, too. I'm approved in the ones you have shown (with removal of the bottom strap, of course).

Astraline
Rookie
Rookie
Posts: 9
Joined: Thu Feb 09, 2017 10:10 pm
First Name: Joan
Tkid: 31461
Garrison: Connecticut

Re: Tiny boots size 6

Post by Astraline » Tue Feb 28, 2017 3:32 am

Great thanks!!!
Joan Holycross-Otto
ID 31461
Connecticut Garrison

Post Reply